Description
HTF’s SFP+ 10G 850nm 300m transceiver is designed for use in 10-Gigabit Ethernet links up to 300m over Multi-mode fiber. The module consists of 850nm VCSEL Laser, PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
Applications
10G Ethernet
Data Center
Back to Back
InfiniBand QDR
Compatible Brands
HTF optional transceiver have been successfully tested with below brands:
HTF 10G SFP+ 850nm 300m DOM LC SMF Optical transceiver Module Compatible with the following brand and more |
Cisco SFP-10G-SR-I |
Juniper Networks EX-SFP-10GE-SR-I |
Arista Networks SFP-10G-SR-I |
Brocade 10G-SFPP-SR-I |
J9150A-I HPE ProCurve |
H3C SFP-XG-SX-MM850-I |
Dell Networking 407-BBOU-I |
Extreme Networks 10301-I |
HW 0231A0A6-I |
Intel E10GSFPSRX-I |
NETGEAR AXM761-I |
IBM 45W2411-I |
Mellanox MFM1T02A-SR-I |
Ciena (ex.Nortel) 160-9111-900-I |
Avago AFBR-709ISMZ-I |
Avaya Nortel AA1403015-E6-I |
Alcatel-Lucent iSFP-10G-SR-I |
D-Link DEM-431XT-DD-I |
F5 Networks F5-UPG-SFP+-R-I |
Ubiquiti UF-MM-10G-I |
Ordering Information
Part Number |
Package |
Data Rate |
Reach |
Wavelength |
TX output |
RX Sensitivity (dBm) |
Power consumption |
Interface |
HTSX-M8596Sx |
SFP+ |
10G |
300m |
850nm |
-6~-1dBm |
-10dBm |
<1W |
LC |
HTSX-S3196Lx |
SFP+ |
10G |
10km |
1310nm |
-6~0.5dBm |
-14.4dBm |
<1.2W |
LC |
HTSX-S3196Ex |
SFP+ |
10G |
40km |
1310nm |
-1~3dBm |
-15dBm |
<1.5W |
LC |
HTSX-S3196Tx |
SFP+ |
10G |
2km |
1310nm |
-6~0.5dBm |
-14.4dBm |
<1.2W |
LC |
HTSX-S5596Ex |
SFP+ |
10G |
40km |
1550nm |
-1~3dBm |
-15.8dBm |
<1.5W |
LC |
HTSX-S5596Zx |
SFP+ |
10G |
80km |
1550nm |
-1~4dBm |
-23dBm |
<1.5W |
LC |
If you have customized requirement for the TX output, RX Sensitivity etc, contact HTF sales online or leave message.
HTF team will support you within 2 hours.